Auto

How to clean car wheels with your own hands - tips and tricks

June 8, 2020

Car wheels are a part, most prone to all kinds of pollution. Puddles, dirt, bitumen particles, drops of oil on the road - all this leads to it, that after a while the wheels don't look their best. Some car owners do not pay much attention to this: what can you do, the wheels get dirty quickly, do not wash them now every day.

However, you should know, that dirt on the surface of the discs not only spoils the appearance of your car, but can also cause serious problems.

If they are not cleaned in time, contaminant particles can get into microscopic cracks and become foci of corrosion in cast disks. That is, timely cleaning will not only return your car to an attractive appearance, but also extend the life of the wheels.

Cleaning car discs with special tools

Most convenient, Of course, in this case, go to the car wash and have a quiet snack, while your car will be handled by professionals. However, someone can not afford it, and there are many fans to do their own car.

As you might expect, cleaning the wheels of the machine - the process is quite simple. He can afford even a woman or teenager. You just need to know some subtleties, which will be discussed below.

What you need to know before you start

To begin with, let's look at some points, which you need to know in advance:

It is recommended to clean the wheels at least once every two weeks.
Once a week you should wipe the wheels with a damp sponge - then they will be much easier to wash later.
If you remove the wheels, it will be much easier for you to clean any, even the most inaccessible areas.
To wash away dirt, you should not choose a tool with aggressive components. They can break the brake hoses, wheel studs, bolts and brake discs.
Do not wash a surface heated in the sun, otherwise stains from the cleaner will remain.
Soft materials and sponges should be chosen for the work, to avoid scratches.

Three-phase disk cleaning

Cleaning is necessary not only on the outside, but also from the inside.
Alloy wheels stop shining under the influence of steam.
When applying detergent to the surface, time must be strictly adhered to, which is recommended by the manufacturer.
Before using the detergent, be sure to read its composition and instructions - this will avoid serious mistakes.
After washing it is necessary to wash off means from a surface.
Damage to the coating must be repaired immediately, so that they do not cause corrosion.

Required materials

Here is a list of that, what you need for that, to qualitatively wash the alloy wheels of your car from all sorts of dirt:

Soft sponge, absorbs moisture well.
Microfiber fabric.
Sandpaper on the handle.
toothbrush.
A weak solution of citric acid.
Bucket.
Water.
Car detergent.
Jack.
Hose with spray nozzle.

<h2 id="h2_3">Cleaning alloy wheels</h2> After we armed ourselves with the necessary knowledge and stocked up on all the materials, which may be needed, we can get to work. Step by step this procedure is as follows: <ol> <li>As mentioned above, to better wash away dirt in all hard-to-reach places, wheels are better to remove.</li> <li>Then thoroughly wash them with water from a hose with a spray. So we get rid of dust and those types of pollution, which are relatively easy to remove.</li> <li>Now it's time to clean with a sponge - you need to walk it well on all surfaces.</li> <li>After the sponge, treat all surfaces with a toothbrush and sandpaper. You should be extremely careful, so as not to scratch the surface. To do this, be sure to moisten it with water.</li> <li>Remove particulate brake dust with weak citric acid. A strong solution will give the wheels shine, but will destroy a varnish covering, so it should be soft. Apply to dirt, leave for a few minutes, then rinse.</li> <li>Oil stains can be removed with apple cider vinegar.</li> <li>Wipe the surface dry with a microfiber cloth.</li> <li>Cover the disc with a special wheel wax - this will help better protect the surface.</li> </ol> Protective universal overlays on a car bumper <img />The wheels look like new after deep cleaning This cleaning can be considered complete - you can put the wheels back on the car. <h2 id="h2_4">Conclusion</h2> Timely cleaning of disks - It's not just a way to keep your attractive, but also the ability to protect disks from premature destruction. It is recommended to do the procedure of washing dirt from the wheels of the car at least once every two weeks - then you will be sure, that they will last you a long time. Self-cleaning disks is a simple process, almost anyone can handle it. No skills, in addition to patience and hard work you will not need. In order not to make mistakes, read the instructions carefully and prepare properly. Use the principle in your work: "Do no harm". That is, do everything carefully, do not use untested cleaning solutions, carefully follow all the recommendations - and the disks of your car will shine. To consolidate success, do not hesitate to use car wax for finishing - it will be an additional factor of protection for the wheels of your vehicle.