Tile

Treat the entire surface: material features

February 26, 2020

If it is necessary to execute facing of self-made internal walls, the question arises - how to lay tiles on drywall. Interior partitions and various wall constructions are most often erected from this material. Including it is used for leveling surfaces, less often gypsum fiber is used for the floor.

Is it possible to glue tiles on drywall? Of course. But for this purpose a certain list of preparatory works is carried out. In other respects, the process itself is little different from the traditional one.

I put ceramic tiles, features of GKL are considered

Necessary materials and tools

To perform the work of facing the surface of drywall, you will definitely need the following materials and tools:

  • adhesive mixture;
  • polypropylene mesh;
  • putty;
  • set of spatulas: straight lines of different sizes, five-millimeter gear, small rubber;
  • plastic crosses;
  • grout seams;
  • epoxy resin;
  • primer;
  • metal profile;
  • tile cutter;
  • level;
  • slope;
  • ruler;
  • pencil;
  • foam sponge;
  • construction mixer;
  • container for preparing the mixture.

Basic tools

On what solution to glue a tile? It is best to buy a special glue. It is easy to find in almost any hardware store.

If laying tiles in the bathroom, additionally treat the base with water-repellent impregnation and antifungal agent. You will need waterproof drywall.

Surface preparation

Before gluing the tile, prepare the base:

  • Joints are filled with putty, so that there are no seams and cracks.
  • Drywall has excellent adhesive properties, but for improvement of grip of materials and strengthening of a design it is recommended to fix on a wall surface a polypropylene grid for plaster, especially at the joints of the plates.
  • Before gluing the tile, the surface is treated with antiseptic and moisture repellent, this will protect it from the accumulation of excess moisture and the formation of mold and fungus. In the kitchen, the principle is preserved.
  • It is not necessary to putty drywall, because it is already very equal, and small defects will eliminate a layer of glue.
  • Mark the future coating and set the control beacons to comply with the level and contours.

Installation of drywall includes additional insulation, if necessary

Laying tiles

Before gluing the tile on drywall, pay attention to that, that the glue and the surface of the material are bonded together instantly and almost tightly, therefore, no work is allowed in the work, even the smallest errors, since it will no longer be possible to fix them. Otherwise, you will have to completely dismantle the defective part of the wall and install everything again.

Laying ceramic tiles involves the use of special glue. That under weight of a tile facing did not float down, fasten the support rail, it is usually placed at the level of the beginning of the second row of whole tiles.

How to put a tile on drywall:

  1. Dilute the glue and leave for a few minutes 10, that he insisted.
  2. Apply the mixture on the surface no more 1 square meter. Distribute the mass with a notched trowel.
  3. Apply the tile to the intended location. Press and tap the area of ​​the tile with a mallet.
  4. Place the following items at a distance 2-3 mm from each other, depending on the size of the tile.
  5. At the joints, clean the solution and install plastic crosses.
  6. The latter are stacked threaded fragments. Micro-chips are allowed, they are then smeared with a grout mixture.

Plasterboard surface cladding involves the use of special glue

Grouting seams

Once the tile is laid, take care of the proper design of the joints. This is done in order to improve the appearance of the coating and protect it from germs and moisture.

For the basis of drywall is better to buy a grout with the addition of epoxy components, the resin will block the access of moisture and will reliably protect the walls, floor and other surfaces, lined with tiles.

Apply the required amount of mass on the cleaned seams. Compact it with a rubber spatula. Treat the entire surface, Treat the entire surface, Treat the entire surface.

Treat the entire surface

Treat the entire surface

Treat the entire surface, you need to remember, Treat the entire surface, Treat the entire surface. Treat the entire surface, Treat the entire surface, Treat the entire surface. Treat the entire surface, Treat the entire surface.