How to use an iron: instructions and basic rules
Modern irons have many additional features, Modern irons have many additional features. Modern irons have many additional features, Modern irons have many additional features. Modern irons have many additional features?
Precautions
Modern irons have many additional features, Modern irons have many additional features. You need to make sure, Modern irons have many additional features. Modern irons have many additional features.
Modern irons have many additional features: there must be no visible damage to it or to the rope, the sole must be clean, without traces of dirt and scale.
If the possibility of steam treatment is provided in the iron, water is poured into a special container, following, so that liquid does not get inside the device.
It is recommended to iron things on a special board or any flat hard surface, covered with a clean non-fading fabric. To increase the efficiency of the device, a sheet of foil is placed under the fabric or cover of the ironing board.
It is not possible to check the degree of heating of the device by hand - you can get burns.
Preparation of linen
Make sure, that the linen is clean. Under the influence of high temperatures, dirt can only penetrate deeper into the fabric, and getting rid of stains will be much harder.
Disassemble things into separate stacks, having studied the shortcuts. The principle of selection: recommended fabric processing temperature. Start working with clothes, which needs to be ironed with a slightly heated iron, and, increasing the temperature, go to the next batch. So the process will go faster, and the risk of spoiling things will be eliminated.
Ironing process
Procedure:
- Pour distilled or filtered water into the tank. If you use the usual, a plaque is formed on the holes for steam supply over time.
- Select the desired iron mode, place the appliance on a stand or place it vertically, to keep him warm. Instructions for using the iron will help you choose the right temperature, if there is no special scale on the body of the device.
- Lay the thing out on the ironing board, straighten carefully, that there were no folds and creases on it.
- Run with a heated iron to the desired temperature along the thing (if ironed across, the fabric will stretch or deform). Drive over the entire surface of the product, without staying in one place for long. To smooth out wrinkles, use steam mode.
- After, how one side of the product will be processed, turn the thing over, and iron it again.
- Having finished, hang clothes on your shoulders and proceed to the next. While you work, the fabric dries from steam, and you can, if necessary, remove the thing from the hanger and fold, to put on the shelf.
- After ironing, switch off the iron. Only after that, as it cools completely, put it away in the usual place of storage.
Forbidden
To avoid injury and fire, is prohibited:
- turn on the appliance faulty or not suitable for the technical characteristics of the socket;
- use adapters and extension cords, to connect the iron to the mains;
- leave the appliance running unattended for a long time;
- put the included iron there, where children can reach it;
- use a faulty appliance or a appliance with a damaged cord.
Learning, how to use an iron, you can start the ironing process.