How to mount deflectors. Installation of deflectors
Almost all new vehicle owners, consider it their duty to put plastic accessories on their car. Therefore, the installation of side window deflectors is very important.
The right choice of device
The first thing to consider when choosing window deflectors, that they are purchased exclusively in accordance with the specific make and type of vehicle. There are no universal models, because the design of the body and windows of each car model is unique. The main criterion, according to which all devices are classified, there is a way to attach to the car window. On this basis, distinguish the following categories:
- Side window deflectors with screw connection, to install which it is necessary to damage the hood and door frames, open in them;
- Devices, which are placed on a double-sided elastic substrate, treated with adhesive liquid;
- Combined deflectors. Their design combines several methods of mounting on car windows;
- Side window deflectors, which are fastened by means of special clamps and arms.
Window deflectors
Aggregates, to install which you need to drill holes, and thus violate the integrity of the coating of the car body are less popular. The most common today are the following two methods of installation:
- Glue the device with adhesive tape or insert it under a rubber gasket (used when working with window "windshields");
- Secure the device with the clamps, brackets and special adhesive gaskets.
Roof rack - recommendations for choice
Installation of the deflector "Vetrovik"
It is very easy to mount such a device with your own hands. The field of, as everything needed to install the deflector was properly selected and prepared, you can get to work. First of all you need a thorough surface, where the installation will take place. It is desirable to use a degreasing agent. For polishing it is best to use a technical solvent, duds, as well as paraffin - and wax-containing mastic. It is best to glue the side window deflectors then, when the weather is dry outside, and the body temperature is not lower than eighteen degrees. It should be taken into account, that installation work must be carried out simultaneously for the front, and for the rear windows of the car.
The following algorithm should be followed when installing a window deflector:
The process of installing deflectors
- On the surface of the car door frame, where the device will be glued, it is necessary to degrease by means of alcohol or alcohol-containing liquid and to wipe dry;
- The protective film on the adhesive part of the window deflector must be peeled off a couple of centimeters and bend up the peeled fragments;
- The side window deflector must be attached to the installation site, pre-lubricating the exposed parts with glue to ensure better adhesion to the surface of the window frame;
- After, as a visual assessment will confirm the correctness of the installation, the protective film must be carefully removed to the end and glued to the entire surface;
- Perform the same procedure for the other windows.
Installation of "Flycatcher"
There are always several mounting brackets included with each fly swatter. They may differ slightly in parameters, however, they perform the same function. If you want to properly mount the "fly swatter" with your own hands, then you need to follow this scheme:
Installation of a towbar on Lacetti: sedan, hatchback and station wagonThe process of installing a deflector on the hood
- The hood must be thoroughly washed and wiped dry, then its front part is degreased with solvent;
- It is necessary to install brackets on the device and to carry out fitting;
- Places are marked on the hood, where the brackets will be attached;
- These places are covered with special gaskets, providing protection of LKP;
- The brackets are mounted on the hood and fixed in a strictly fixed place;
- The "pads" from which the film is removed are attached to the rear parts of the devices (strictly in that place, which is specified in the instructions);
- The device is mounted on the intended place, tighten the bolts on the brackets.
Similar records
Auto 