Categories: Machinery

How to adjust and check the accuracy of electronic floor scales?

The weight measuring device must accurately indicate, how it changes, admissible, your body weight. To take into account every gram, the appliance must be set up correctly. Unfortunately, without food it will not work. Therefore, the first, what you need to do - install the batteries. After that, you can proceed to the direct configuration of the measuring device. About that, how to set up electronic floor scales will be described in detail in this article.

The setup process

In order for the device to show you the current numbers, place it on a flat and hard surface. Adjusting electronic scales begins with providing them with a stable position.

It's important to remember that, that the location of the device at the first inclusion is decisive for further correct operation.

so, how to adjust electronic scales? The first thing you need to turn on. On different models, this is done in different ways. In one case - it's a gentle touch, which puts the device into working condition. If zeros appear on the display, then you can start using. Otherwise, to make the scales work, need to be completely on the device is configurable.

You need to get on the scales this way, so that the feet are parallel to each other. This will ensure proper weight distribution, and also guarantees you the accuracy of the readings.

Accuracy check

Body weight is a variable. There are moments, when you start thinking, and whether the configured device is working properly? Here are some tricks, about that, how to check scales.

Major mistake, which is allowed by users, when checking scales for accuracy of measurements is installation on a platform of various subjects. Floor electronic scales are customized for humans, therefore such a check, probably, will damage the device.

When buying, specify, where the readers are located. Sensors, built into each leg, ensure the accuracy of measurements.

To find out the exact evidence, no need to adjust anything. You just have to decide 5 times. The data obtained will help calculate the error of your device: subtract from the largest result smaller. The permissible error should be no more 400 grams.

If you are faced with that, that the difference in results is more important, then perhaps the problem lies in the failure of the sensors. One incorrect weighing can break the device.

The reset button helps to fix this problem, which is usually located on the back of the device. If this does not return the device to normal operation, then you should contact the master or think about a new purchase.

Reset button on the back of the scales

Storage conditions

When using precision devices, it is important to remember to save them:

Eliminate temperature differences, high humidity, blows, dust and exposure to sunlight.
Keep scales away from heaters.
Use a damp cloth to clean the platform, for foundation - dry and soft. Chemicals or abrasives are not recommended for use.
Use and storage of scales in rooms with high humidity, the ingress of liquid into the housing can lead to the destruction of metal parts and affect the accuracy of the measurement.
Do not use physical force on the scales, jump on them.

Provide decent storage conditions for your device, and then it will serve you for many years.

Conclusion

A flat and solid surface is required to adjust electronic scales at home, which will provide them with a stable position. Otherwise, the process depends on the quality of the device.