Categories: Auto

How to get a khaki color - Tips for painting a car

It is not uncommon to see non-military khakis on the street. More and more car owners are choosing this color for their vehicle.

Painting the car in khaki

Cars are painted in this way mainly for fishing trips, hunting and frequent use in agriculture. In some cases, this color has a special purpose car. Here you need to make a small clarification - depending on the brand of the car during the inspection or registration of documents may have problems.

It should be noted, that to get such color for the car and to make painting by the hands is simple. The main thing, what you need to be able to get the right color is to mix colors correctly. Not the last place in this process is occupied by preparatory works on a car surface.

The car is painted in khaki

How to get color?

If you do not have the time or desire to mix colors to get the desired shade, you can buy ready-made paint (autoemal). But pay attention to that, that the color on the car may be slightly different from the one indicated on the jar.

Khaki paint is obtained by mixing:

brown;
sand;
green;
beige colors.

A color palette is needed to get a khaki color

It should be noted, that green can also be used with shades: dirty green, pale green, with an admixture of brown. It all depends, what color should eventually prevail.

pay attention, what if you later want to paint your car in camouflage, then the khaki base is a must.

To get the standard khaki color, you need to use the following colors:

brown;
black;
green.

If you mix these three colors in equal proportions, you can get a standard khaki color. To predominate any shade, the corresponding pigment must be added in larger quantities. The more primary color, the more noticeable will be its shade on the surface of the car.

How and what to paint plastic car with your own hands?

pay attention, that for this type of work you need to take only car enamel. It is more difficult to carry out such measures qualitatively with the help of balloon paint. In addition, get a shade of one color will work.

Khaki car enamel

necessary tools

To make your own car painting in khaki, must have:

material for gluing unnecessary parts of the car;
masking tape;
paint;
solvent for paint;
abrasive machine or sandblasting to remove the old coating;
putty;
surface degreasing agent:
priming;
gun with a nozzle for spraying paint;
polish;
liquid wax.

Necessary materials for car painting

If you intend to make the surface of the car matte, liquid wax is not required.

It should be noted, that for rich and correct, in terms of color, shade, not recommended for use anymore 4 colors.

Етапи процесу

Conventionally, the process of painting a car in khaki can be divided into the following stages:

preparation of the surface of the car and the room, in which the work will take place;
removal of old paintwork;
spackling and soil treatment;
dyeing;
fixing paint and polishing the surface of the car.

From that, how well the preparatory work will be carried out, the result depends.

Preparatory stage

It is better to carry out such painting works indoors in the warm season. You must first thoroughly clean the work site from dust and unnecessary items.

The surface of the car should be washed and dried. All components, which will not be prone to staining, need to be removed. These include pens, locks, mirrors, honors. They, that cannot be removed, it is necessary to cover with a dense paper and to fix with masking tape.

Painting the car door with your own hands

After the car is cleaned and covered with protective material, you can start removing the paintwork. Since it is difficult to do it manually, it is better to use a special grinder with a fine abrasive or sandblasted. The final stage in this case is to blow the car with compressed air.

Removal of a paint and varnish covering from a car

Surface finishing

Once the LCP is completely removed, you need to degrease the surface. pay attention, that you can do it with ordinary solvent or gasoline. To do this, you need to buy a special fluid. It can be applied with a spray or gun.

After the surface of the car dries, all chips should be closed, small defects with putty. After drying of the processed places it is possible to prime a surface. It is better to choose the color of the primer as close as possible to the color of the paint. It is better to put a first coat in 2 layers. At this stage, the preparatory work can be considered complete.

spackling machine

dyeing process

The paint should be applied with a gun with a nozzle diameter 1,4-1,6 millimeters. The movements should be smooth, you should gradually move around the car clockwise. Take note, that you need to work in a respirator.

The amount of paint should be diluted immediately. Otherwise, you can get a mismatch of shades on the surface of the car. Better, if car enamel will be available a little with stock.

It will dry completely 7-8 days. It is still undesirable to use the car. Car paint should dry in a dry and warm place, well-ventilated room.

Painting auto painting box

final stage

If you want to get a matte car surface, then the surface should be treated with matte varnish. Like most LKP, it is better to apply it in 2 layers. After the varnish dries, the car can be simply processed by usual polish for metal.

admin