How to clean a washing machine with vinegar from scale, mold and dirt

The cleanliness of household appliances should always be monitored. There are many ways, how to properly maintain cleanliness in the house, for example - various detergents and chemicals from scale, dirt, mold and so on. But the hostess, which are understood in this case, give you advice - you can use acetic acid. Everyone in the house has acetic acid, but not everyone knows how to use it, but I will help you. Now we will tell, how to clean a washing machine with vinegar from scale and dirt.

Washing machine cleaning: step by step instructions

Many housewives wonder if it is possible to add vinegar to the washing machine to remove scale, dirt, mold and odor? Of course you can, the main thing after the cleaning procedure, rinse the washing machine well from acetic solution and scale residues.

Чистка пральної машини содою і оцтом відбувається за спеціальною інструкцією:

1. Remove all unnecessary items from the drum, if any. Acetic acid can ruin things.
2. You will need 9% food acetic acid. Pour half a glass of acetic solution into the powder compartment. Don't forget to wear rubber gloves, vinegar can damage the skin.
3. Start the washing machine, select the longest wash cycle at high temperature and switch it on.
4. When a little time passes, for heating of the car the automatic machine, press pause and wait 1-1.5 years.
5. Start the machine again to complete the cycle.
6. Do not forget to descale the drain filter.
7. Mix 50 ml of vinegar in one liter of drinking water. Wipe the drum and cuff with this solution.
8. Switch on the machine in a short cycle, for the final purification of acetic acid residues and scale.
9. Do not forget to wipe the internal components of the washing machine. Wipe the powder container with an ordinary cloth.

If you have 70% vinegar and want to clean the washing machine, then acetic acid can be mixed with water approximately 1 to 7. Calculate, how much water and vinegar to add, to get the amount of nine percent vinegar you need.

Чистка порошкоприйомника

And how to clean a powder container? You will need all the same vinegar. Pour into a container of warm water and fill approximately 250 ml 9% acetic solution. Put a tray in this mixture and leave for a day. Choose a special container, so that the solution was poured to the edges, this will help to clean the powder hopper more efficiently. After all these actions, take a sponge and wipe the container, it must shine. How to clean the container with baking soda and vinegar? Let's tell. Make a mixture of baking soda and vinegar and apply to the walls of the container, leave for a while, after about two hours, clean the plaque with a brush (you can use dental) and rinse.