Residents of modern high-rise buildings may face such an unpleasant phenomenon, as the weakening of water pressure in the pipes. For, to find out, personal or general, it is necessary to visit neighbors on a riser first of all. If they are all right, water pipes will most likely need to be cleaned, located at the level of the problem water supply point.
Weakening of the water pressure from the tap can be caused by clogging of the pipes
Most often, the pressure drop is caused by deposits on the walls of the pipeline. And even if it is made of plastic components, after all, they join the metal pipes of the risers. It is in this place to look for the cause of clogging.
Lots of rust, having the shape of layers, peels off from old pipes, and the flow of water distributes it evenly along the entire length of the water supply.
Wrinkle! Although removing deposits and rust from the walls of water pipes is a very tedious procedure, do not postpone it at the slightest suspicion. This way you will not only ensure comfortable use of the water supply system, but also forget about the problem of low pressure for the coming years 10-15.
Pipes can also be clogged with sand or other impurities. The reason for this lies in the fact, that over time their surface becomes rough.
Rust and other deposits accumulate even in plastic pipes
Before you start work, it is necessary to locate the place of clogging. This way you will avoid additional difficulties during its implementation. In addition to the inner wall of the pipe, usually clogging is formed:
At best, low pressure can contaminate the mesh barrier in front of the column., washing machine, counter or strainer faucet. If their dismantling followed by rinsing with water did not help, the conclusion is unequivocal: the pipeline was clogged.
There are several ways to do this today, how to clean water pipes at home. The specific choice of one of the methods depends on the functional state of these elements of the water supply system, their course and location.
So, example, cleaning water pipes from deposits in old houses is not the best solution. After all, they are clogged, usually, present in large quantities. In this case, you should prefer the option of replacing pipes with propylene or metal-plastic products.
If filters are installed in the pipeline, you need to clean them first
If one area was problematic, cleaning water pipes from rust can be one of the following ways:
If you want to know, After closing the water supply system, After closing the water supply system.
First, than to apply chemicals, you need to try to clear the debris with a rope
The sequence of actions is very simple. Cover in the purified area of water supply, anger the water, unscrew the faucet and pour the tool into the vacated hole in the pipe. Leave everything in this state at least, than on 1,5, and better on 2 years. After that, you can install the faucet in place and start using the water supply.
But remember, that of all the above methods of cleaning water pipes with their own hands, the least desirable chemical. It can cause chemical poisoning of the water and damage the walls of the pipeline.
Useful to know! The use of chemicals to remove deposits and rust from water pipes at home requires precautions. This is due to the fact, that getting the mole on exposed skin can cause chemical burns. Therefore it is necessary to carry out this work in protective gloves.
The first and most important protection is the primary filter. In everyday life it is called a coarse filter. Structurally it is made in the form of an ordinary grid, which catches large pieces of rust. There may be several such devices in the system. New settlers sometimes do not even know about their existence.
In apartments of modern multi-storey buildings, the filter is usually placed in front of the meter, and as its location is a special flange with a plug, unscrewing which, you can get a cylindrical grid from the channel. Don't be surprised, if it is clogged with deposits so firmly, that you will need a nail or screwdriver to clean it. This mesh is made of stainless steel. Therefore, she herself does not corrode. But the rust grows on it very densely, clogging the holes.
Useful Information! A good way to cleanse is to use concentrated acid, example, salt. Short-term exposure removes deposits in seconds and does not damage the grid.
Any pipelines are a real engineering structure. Therefore it is necessary to keep pipes in order. Not only the health of your whole family depends on their cleanliness, but also the state of used appliances.
A sewing machine is an indispensable tool for many housewives.. Ее наличие среди бытовых принадлежностей дает возможность…
Fuel truck - special equipment, which is intended for the transportation of refined products and fuels and lubricants. Она представляет…
If you are determined to learn the acoustic guitar, варто одразу купувати якісну продукцію в надійному…
Face masks are one of the most popular face care products.. After all, они становятся…
"The key to a woman's heart is an unexpected gift at the wrong time", - says Forrester in the film "in…
Modern hairpins can not only fulfill their immediate obligations, но и сделать образ девушки индивидуальным…