Categories: Machinery

How to unlock the TV remote control yourself

In the process of using the technique often have to find answers to questions, how to unlock remote control from tv. This often happens after that, how it comes under the control of pets or young children. Coincidence can also be to blame, when certain of its buttons are pressed arbitrarily.

Боже, що ж робити?

There are many ways to unlock the remote control. But not all of them will be effective for a particular model. The best option is to watch the instructions for the TV. Usually there are answers to all common questions. But the book is not always stored after the purchase of equipment. For this reason, you have to look for the answer yourself.

The instructions usually prescribe a special code. It will be enough to press this combination on the buttons of the remote control, and the problem will be solved. If no papers have survived, first, what to think about - how the blocking happened. Trying to do the opposite, you can make the remote control effective for the TV.

alternative ways

There are many options for unlocking the remote control, offered by Internet users:

You must simultaneously press the "P" and "+". After that, a combination of the same numbers is dialed, example 2222 or 5555. Among the common and standard codes are accepted 1234 or 1111. After dialing the combination, press "+" again. Perhaps, it will be a completely different combination of numbers. There are many options to try.
After, how the initial digits from the first method are pressed, the LED must be lit continuously. In this case, you can try pressing simultaneously instead of a combination: "Menu" and "+ Channel", "Menu" and "+ Volume".
Sometimes it is enough to hold down one button for about 5-10 seconds. But this method is suitable for a few TV models.

Some remote control models can be unlocked by pressing the "Exit" buttons and numbers at the same time 9 and 1. Also suitable is the option of removing the batteries, and when inserting them, the power button must be held. These methods help to return the remote control to full operation.

Sometimes hotel mode can be enabled instead of blocking. That the panel started to work fully, the mode should be switched off at the touch of a button: Hotel service is located in the Display-Menu-Mute-Power section, the label from the "On" position must be moved to "Off".

admin