Machinery

How to make a kangaroo with your own hands?

March 18, 2020

Drivers, who are fond of hunting, fishing and other activities, involving off-road driving, often try to protect the front of the car from damage. Off-road optics, radiator grille and hood can be severely damaged by collisions with such obstacles, like stumps, low branches of trees, large stones, etc.. To avoid this, there are different types of power bumpers or, as they are called, kenguryatnikov. Some motorists do not look for finished products in stores, and try to make kangaroos with their own hands.

Kangaroo - a metal structure, made of pipes, designed not only to improve the overall appearance, but also to strengthen the protection of the front of the car

What is a kangaroo

The power bumper is a lattice design, which is attached to the front of the machine and protects it from damage. At direct blow optics, bumper, the radiator grille will not be affected - this is the main purpose of such a product. It looks quite simple - it's a system of pipes, curved and welded in this way, to repeat as much as possible the relief of the front of the car.

The invention of the power bumper belongs to the Australians - it helped protect the car from collisions with kangaroos, who jumped on the road and often became the culprits of serious damage. In our region today, the power bumper is also quite common - motorists put kangaroo on the UAZ, Niva, Eye and other car brands.

Drivers, that asks the question, how to make a kangaroo with your own hands, worth understanding, that this work is not simple. You will need the talent of a designer for this, skills of materials processing and possession of a welding machine, as well as a specially equipped box with tools.

Which film for tinting car windows is better?

design phase

At this stage, you should draw the design of your future product. You need to clearly depict in detail and provide the dimensions of the product, which you are going to make. If you do not feel a design talent, use the Internet.

In many cases, kangaroos are homemade, after all, for many brands of cars, they are not provided by the manufacturers

You can easily find everything on special forums, anything - a project of a power bumper on the UAZ Hunter or instructions on how to make a kangaroo on the Gazelle with your own hands. At the same time, you must be aware, that the make and model of the car are crucial.

fitting phase

Once the drawing is ready, proceed to the fitting phase. Before you start working with metal, it is worth checking the correctness of the calculations:

  • Make stencils of cardboard parts and try on the car.
  • If errors are detected, fix them in the project.
  • After correcting the errors, try again and repeat until then, until you are sure, that your preliminary calculations are correct.

Manufacturing and installation phase

After development of the project and fitting stage it is possible to start work. Before, how to make a kangaroo on the UAZ, Eye or Niva with their own hands, stock up on materials - you will need a pipe with a diameter 51 mm or 76 mm and sheet steel with a thickness of 3 mm.