Which coil is best for the trimmer: automatic, semi-automatic or universal
A fishing line reel is by definition a consumable. Each trimmer manufacturer produces its own model of this consumable, but there are also universal models. Their disadvantage is that, what, despite its versatility, they are not suitable for every trimmer. In the article we will prompt, how to choose a coil for the trimmer and consider the devices, on which it is possible to work with universal consumables.
What are the coils
The main advantage of the trimmer is maneuverability and mobility. Its purpose is grass, growing in country areas, leveling lawn grass and mowing meadow.
With this device you can mow the grass in those places, where a gasoline lawn mower can't get. In addition, with the help of a trimmer you can easily handle bumps and slopes. If you replace the cutting element on the disc, then they can even cut and trim bushes and flower beds.
The construction of the trimmer begins with the cutting part, then comes the barbell, motor and handle with control mechanism. A coil is installed on the trimmer to work with the lawn (head). Usually, There are three types of reels according to the method of feeding the line.
- Manual. The principle of operation is easy to determine by name: fishing line is fed mechanically. For, to lengthen the cord, the device should be interrupted and the ends extended manually. Despite the apparent inconvenience, this type of coil is the most reliable in operation. Their use requires some skill, but, learning to work with hand heads, in the future there will be no difficulties.
- Semi-automatic. If you need to replace the cord is required, so that the coil touches the ground. You must press the appropriate button at the same time, which opens the anchor mechanism. After opening the cord is lengthened by centrifugal forces. The peculiarity in this case is the fact, that all action occurs when the device is running, you do not need to turn it off. Working with a semi-automatic coil is quite simple, unlike manual, it does not require skill. However, such heads are a little more expensive.
- Automatic. The cord is lengthened by reducing the speed of the trimmer motor. And when the turnover increases again, the line is fed automatically again. This type of coil is the most comfortable and best to use. The disadvantage of this technology is the increased cost, Besides, due to manufacturability, breakdowns are more common.
Considering all three options for coils, it is possible to come to the following conclusions: handhelds are the least desirable to use in terms of convenience. Semi-automatic, although less reliable, but provides basic comfort. Automatic is the most convenient, but when operating such a coil, users usually complain about the increased consumption of fishing line. Most users and experts agree, that the best and optimal is a semi-automatic coil.
As mentioned above, there is also a universal coil for the trimmer. A distinctive feature of this type of head is the wider scope. Simply put, they are suitable for more than one model of trimmers, and a few. To make sure, whether a universal head will fit your trimmer, the marking of the part itself should be studied. If it matches the model of your trimmer, then you can safely buy this coil.
The advantage of universal coils is their relatively low price and ubiquity. The disadvantage is the claimed support for the trimmer model, although in reality they may be incompatible.
To avoid confusion, it is recommended to consult with the seller, calling him in advance the model of his trimmer.
Before you buy a consumable, it is necessary to study its features in advance. Example, many universal metal coils, not plastic. Although they have fishing line, usually, from the same universal material, as in most manufacturers.
Differences on the principle of charging the line
Types of coils for the trimmer differ in the principle of charging consumables.
- Fast. The nozzle of the new cord passes without removing the coil from the base. It is very convenient, also saves time. The tip of the new line is pushed into the spool and wrapped around the surface several times. As soon as a certain value is reached, the cord is cut. Usually this method is used by petrol scythes.
- Collapsible type. Based on the name, it is already becoming clear, that to replace the fishing line you need to turn off the inflammation and remove the head. The new head is wound in place of the old one, then the coil is closed and installed back.
Also, various models of trimmers are equipped with semi-automatic heads, which, in turn, consist of a pair of parts, hull and spool. Both elements contain springs. The spool is available in different versions:
- One-section - uniform winding of a fishing line (both parts).
- Two-section - each end of the line is wound separately, on the relevant part. Usually, this type is considered the most comfortable and practical to use. In a two-section spool, the fishing line is never tangled, and also will not bake.
the coil is two-section
Feature: you can easily and quickly turn a spool with one section into a two-section. First you need to find a strong enough plate. The diameter of the spool is measured on it and cut out along the contour. The thickness is taken near that place, where the line is wound. Importantly, so that the circle moves freely. The next step is to make an appropriate incision in the ring. Then the ring is put on the spool and fixed with strong fixing glue and adhesive tape. If done correctly, as a result, it will be possible to wind the fishing line in different sections.
Convert one-section coil to two-section
Universal coils have several holes (from 2 to 4), which are always located opposite each other. The ends of the grass are cut out of the holes. There are also types of coils, where you can install only a fishing line of a certain size. What's interesting, in such coils the number of holes can reach 12.
There is an opinion, that the more holes, through which mowing fishing line can protrude, the easier it is to use the device itself, but this statement is not always true in practice.
Many users can not adapt to work with such heads, prefer tested on their own experience coils. To replace such a line, the motor must be stopped, which is not very useful for a gasoline trimmer. Besides, its use leads to increased consumption of fishing line, and to operate trimmers with a coil of this type is convenient only on level ground, without pits and irregularities. In short, there are clear restrictions on use.
Before you buy a trimmer, should determine the type of coils, which will be installed on it - this will help avoid additional costs.
Popular models
Choosing, which coil is best for your trimmer, see the list of heads, which have already earned a lot of good reviews from users.
General K103
This picture is universal. Its weight is 300g. Mainly used in trimmers "Hyundai" and "Makita". The fishing line of this reel is especially strong and reliable, moderate consumption is noted even at intensive use. Cheating is done automatically. Basis (core) metal and breaks very rarely. The head has a height of 67 mm. A flat cap is used here, which lasts a long time. The soft and young grass mows beautifully. There are rare reviews about it, that the cover is still erased, but they are extremely rare. The coating is made of durable plastic.
The average market price is 790-950 rubles.
Coil for EFCO3060
Affordable and good quality head. The line winding system is semi-automatic, so, the most convenient. Mounting diameter 6.6mm. Material quality, of which it is made ??fishing line is good, strong. The coil has proven to be reliable, its use is enough for a decent number of hours. Due to the thickness, fishing line is able to cope with any, even the most densely growing grass. Adapter in the coil of threaded connection. A special cup protects the whole head from damage. This model is suitable for many models, including. "Hende", "Intertul", etc..
The average cost is 800-950 rubles.
Flymo 15
Coil (head) with semi-automatic twist fishing line of universal application. The set includes a fairly thin cup, therefore, the consumption of fishing line may be increased. However, this shortcoming is more than compensated by excellent mowing. The head is installed ??at the 74mm mark, and this is a good result. Only a thin fishing line is used in the spool. The core is completely metal. Mainly used for garden modifications of trimmers from different manufacturers.
The average price tag is at the level of 750 rubles.
EFCO 8100
Apparently, this is the best universal trimmer coil. Includes a special adapter for installation on many models. The type of cheating is fully automatic. The mount has a diameter of 6.2 m, and the height of the coil whole 76 mm. A fishing line with volume is used 1,3 mm. Fastening is carried out by a screw method. The protective cover is very compact, made of special impact-resistant plastic, but the cup is completely absent. First of all, this model is designed for soft young grass, with perennial tall grass she, probably, will not cope.
Average market price 1290 up to 1450.
conclusion
Choosing a trimmer is a simple task. First of all, it is necessary to decide on the site, know the area for potholes, ям, shrubs, etc.. It is equally important to be able to choose the right type of coil, because it will save a lot of time and effort. As you can see, the best choice will be a semi-automatic two-section coil. The brand-manufacturer in this case does not play a major role, you can buy different coils and stay on that one, which will be fastened most conveniently, and the consumption of fishing line will be at a level acceptable to you.
