What water to pour into the humidifier?

Humidifiers have become widespread due to their ease of use and effectiveness in combating dry air. However, for that, that the device worked qualitatively, without showing unpleasant side effects, it is necessary to carefully monitor its condition. Proper water for the humidifier is a necessary component for its proper operation. What kind of water must be poured into the device, so as not to risk his ability to work?

Choice of water for the steam device

Steam humidifiers are considered to be the most unpretentious devices in relation to water, which are used in the process of their work. Because the end result of such an evaporator is steam, which we inhale, the nature of the water component is not of fundamental importance.

An exception, apparently, is the case, when tap water is of very low quality. Then it is necessary to use filters to clean it. If you do not, then the precipitate formed will negatively affect the operation of the device, which you turn on regularly, and it will fail quickly.

The use of the right water in steam models prolongs the service life and improves the quality of work.

Cold humidifiers

In such devices, the air is pumped by a fan through a special cartridge with humidification, which helps to cool the air and saturate it with moisture. If you use ordinary tap water, then the cartridge will clog quickly, and it will have to be changed. Therefore, the water must be carefully filtered, better, if it is distilled. In the absence of such an opportunity, need to buy cartridges, reducing the hardness of the aqueous component.

Water for ultrasonic models

Ultrasonic humidifiers are the most demanding of all types, however, the most perfect and productive. The principle of operation of such devices is reduced to the conversion of electromagnetic frequencies into mechanical vibrations. The oscillations of the included device form waves of different pressures. As a result, even at the most normal temperature, the liquid begins to boil, while fine particles are emitted into the air. With the help of particles formed due to the influence of the fan air flow are carried around the room, creating steam.

Process, as you can see, quite complex, therefore, the requirements for water, participating in it, very high.

The water for such a humidifier must be demineralized and distilled. Otherwise, you will need to change the cartridges frequently, and their price is quite high.

If you are not ready to provide the appliance with water of the required quality, it is better to refuse to purchase such a device in favor of another, more affordable to maintain.

What is distilled water and how to make it yourself

Manufacturers of most models of humidifiers recommend the use of distilled water in their operation. What is this water and how you can prepare it yourself?

Distilled water is called, cleaned of various impurities, organic and inorganic origin.

The first group includes bacteria, viruses and various wastes of animals and plants, to the second - various salts and mineral additives. It is possible to obtain such a purified liquid through a certain technological process. This process is reduced to three main stages:

• ordinary water preparation;
• distilled production;
• providing conditions for storage of the made liquid.

In the first stage, it is important to give the prepared water time to defend. About through 2 hours will be released into the atmosphere of a compound of hydrogen sulfide and chlorine, still through 5-6 Heavy metals will "fall to the bottom". So, the time required to defend the water is approximately 6 hours. Then you need to put in a container tube for draining, placing one end of it on the bottom, and through another - drain the lower third.

The production of distilled water at home is due to its evaporation. To do this, the enameled container is filled with prepared water by about half and placed on a plate. In the water should play from the oven, and on it - a plate of glass or porcelain, cover with a lid. It is desirable to choose a dome-shaped cover, placing its convex part down.

After boiling the water begins to evaporate, to speed up this process, you can put something cold on the lid - pieces of ice, example. Water vapor, reaching the cold lid, turns into droplets of already purified water, which flow down the lid, fall into a glass container. So, after a certain period of time a sufficient amount of distilled water is collected.

In addition to this option, distilled liquid can be obtained from… rain. After all, rainwater itself is already purified.

Of course, this method is suitable for those, who lives outside the city. It's worth remembering, that you can not collect the first drops of rain - they have a lot of pollutants. The process itself is reduced to the need to leave a sufficiently large container in the rain for two days. Usually, during this time all the minerals have time to dissolve in water. The container must be perfectly clean.

The finished water must be frozen for this, to use it in every case. To do this, take the appropriate packaging, fill it with distilled liquid and put in the freezer. Periodically, the condition of the water should be checked - it should not be completely frozen. Only ice is suitable for use, unfrozen water accumulates salts and chemicals, it cannot be used. The ice thaws and is applied there, where necessary. In our case - to fill the humidifier tank.

Conclusion

We hope so, you have received enough information on the subject, what water to pour into your chosen humidifier. With proper compliance with the recommendations, the device will last you a long time and fully implement its functionality. Don't be afraid to buy humidifier options, which, as you think, difficult to maintain.

The more advanced and demanding the model is, the more efficiently it works.

Because humidification is directly related to your health and ability to work, you should not save on devices designed for this purpose.