Machinery

Washing machine faucet: varieties, selection options

August 1, 2020

Choosing a faucet for a washing machine is a responsible step, which must be approached very seriously. This link will provide a reliable connection to the water, which is a very important condition. Choosing the wrong details, negligent attitude to the installation and careless reading of the instructions will lead to unpleasant consequences in the future. A bad crane can not only damage the internal parts of the machine and break it, but also to arrange a real flood not only at your home, but also from your neighbors. We will consider the device of water taps and we will tell about it, how to choose them correctly, and then connect to the machine.

varieties

Faucets for connecting washing machines and other household appliances to the water supply system are divided into several types.

ordinary flowing

Its outlets are located on two sides. This type of device is mounted on a special branch, which connects water supply communications with a washing machine. Taps of this type simply block the flow of water to the device, dividing the branch into two parts.

flowing tap

triple

It has several outputs for connecting devices to the water supply. One of them is responsible for the direct blockage of the flow. Others are conventional flow devices, to combine all branches of the water supply system into one system. These cranes can have different shapes and configurations. This type of cutting system makes it possible to connect several devices in one connection in the water supply system. The standard tap of the flowing system will not be able to allow this due to the design features.

Example, this is how a dishwasher and washing machine are usually connected.

corner

This is a system with two branches of modernized contraction. This allows you to divide the discharge pipe into 2 compartment, while placing it at an angle to 90 degrees. This faucet is best suited for situations, when the machine is connected to a water pipe, located in the wall, due to which it is quite difficult to connect a direct lead.

In addition to automatic machines, it is used in the installation of toilets and other plumbing.

the crane is angular

the need for installation

Most consumers, buying parts for the installation of a washing machine, frequently asked questions, why not just connect the hose to the water supply directly. What is the purpose of the crane? Certainly, there is always the option to abandon the use of this part, but then be morally prepared to compensate your neighbors.

People, have already faced such an unpleasant phenomenon, as a water hammer in water supply pipes, it makes no sense to describe its consequences. This is a fairly common problem, in the event of which the seams of metal and metal-plastic communications are completely torn. And now think, which in the same situation will happen with the soft hose of the washing machine, which is directly connected to the water supply pipes. In a couple of seconds it will not be able to hold back the water and will break completely, and after a few minutes, several floors of the apartment building will be flooded.

That is why without a special overlapping device can not do. The installed faucet will make the use of the washing machine safe and convenient: plumbers recommend blocking the water after each wash.

selection options

Determining the model, pay special attention to the following aspects:

  1. Material, from which the crane was made. The modern market is able to offer models, made of brass or silumin. Experts do not recommend preferring brass, as silumin cranes wear out quickly.
  2. Scheme of the mechanism of water overlap. The most common ball and multi-turn system. In terms of efficiency and durability, the ball is best.
  3. External characteristics of the valve. This part is designed to control the water pressure and its complete overlap. It is very important to choose a valve that is convenient for you. They may vary in size, form and strength, which must be attached to close the tap. In the event of an accident, every second will be expensive, that is why it is so important, so that the surface of the valve is slippery and fits comfortably in the hand.

Connecting the washing machine to the water supply

Having decided on the right valve, you can start connecting the machine to the water supply system. Preparing for the procedure, you need to provide yourself with a worthy candidacy tool and the necessary details. May be required during operation:

  1. Double hose. Usually, it is included in the set of the washing machine, but, if the developer for some reason did not include it in the kit, will have to buy a hose separately. Be sure to specify the required length, it is better to take with a small stock, so that later you do not have to extend the hose. Choose a two-layer hose with wire reinforcement, it can easily withstand high pressure and ensure a smooth flow of water during washing.
  2. Filter flowing system for water purification. This part is mounted directly on the tap thread and is connected to the branch of the water supply pipe. The filter is used to improve the quality of running water and reduce the risk of formation of various deposits. Depending on the quality of the liquid, different number of filters can be used.
  3. Sealing rings, spare nuts, winding. This is a common kit for installing plumbing. These materials are used to ensure the tightness of joints and secure fastening of all components.
  4. Wrench with adjustable mechanism. Used for tightening nuts, pipe connections, pipes and hoses.
  5. Calibrator of plastic pipes. It is used for adjustment and installation of cranes on a pipe cut-in.

Having prepared the necessary materials and tools, you can safely start connecting the washing machine to the water supply system. Think in advance about the scheme of its connection to the main water pipes. There are several.