Acquisition of a semi-automatic welding machine solves many problems of the modern user. The equipment finds its place in the home workshop, and in the production shop, but how to choose a decent device? The rating of the best welding semiautomatic devices from leading manufacturers will acquaint with the most successful models, will reveal their advantages and disadvantages. If the task is to buy a good and inexpensive semi-automatic welding machine, special attention should be paid to technical and operational characteristics. These data are the key factor, which determines the performance and optimal area of use. Don't forget, as for the advertised brand, we also pay money, although sometimes you can do with a lesser-known brand but for a more loyal price.
content:
Aurora OVERMAN 160
Inexpensive inverter semi-automatic Aurora will not fail in the winter cold. According to customer reviews, the device is for 20000 rubles will cope with its task even in -20 ° C, the manufacturer provides blocking of start at temperature -25 ° C. The rating model is suitable for domestic use or operation in professional activities, example, for body work. The inverter semiautomatic device is suitable for welding of aluminum, demonstrates high quality welds even in inexperienced hands, stably works from the network or from the electric generator. Probably the best of the inexpensive semi-automatic welding machines that combines decent technical parameters and good quality workmanship.
advantages:
- there is a wire pull button
- EURO connectors
- inductance regulation
- minimized the formation of splashes
- arc stability even at low voltage
shortcomings:
- no adjustment before- and post- gas
RESANTA Saip-165
A good wire household semiautomatic device differs favorably from analogues in the price segment up to 15000 rubles. The assembled device on the IGBT platform is a plus. The model is equipped with wire feed control and smooth current regulation. With minimal CO2 consumption, the device cooks thick and thin metals equally well, than convenient for garage or periodic work in car service. Although semi-automatic welding and budget, key technical and operational characteristics are quite attractive: wire thickness up to 0,9 mm, gas welding or without, PV at 160 And is equal to 70%, implemented system of protection of the mechanism against overheating. After some manipulations with the current settings and adjusting the feed rate of the welding wire, the user can easily make a smooth and neat seam, than cheap semi-automatic machines can seldom boast.
advantages:
- excellent workmanship, good ergonomics
- light weight for the device of such class
- electronic control of automation elements
- good result when welding thin metal
- large service life
shortcomings:
- no critical remarks were found
Interskol ISP-200 / 7,0
Choosing the perfect device for a wide range of work within 25000 rubles, it is worth looking at the semi-automatic machine from the popular manufacturer Interskol. The equipment is intended for construction, body work, manufacture of metal structures, as well as for various household chores in the garage or cottage. The semiautomatic device is supplemented by the MMA mode (manual arc welding), which expands its capabilities, in addition to wire for welding, you can use artificial electrodes. The model will be the best choice not only for the specialist, but also for a beginner: the welding machine is easy to master and to set initial settings by means of the instruction. Like other semi-automatic machines, with power supply from a single-phase network, in the rating, this device effectively copes with work at the lowered voltage above 170 A, while not pushing the network. Flawless reliability is ensured by assembly based on Fairchild and Infineon transistors.
advantages:
- automatic acceleration of wire supply when burning an arc
- forced wire drawing
- simple change of polarity
- relatively light weight and dimensions
- degree of protection - IP21S
shortcomings:
- short wires
- not suitable for operation at very low temperatures (to -5)
Svarog REAL MIG 200 (N24002)
If the task is to buy one of the best inverter welding semiautomatic devices, pay attention to this model from the Russian manufacturer. Firstly, powerful and durable device is able to cook in two different modes - semi-automatic and manual arc welding. Secondly, attracts the working life of the welding inverter. Third, technical and operational data will allow to cope with household tasks, and with professional workloads. Using the equipment will not be difficult, the convenient control panel has a wire feed regulator, regulator of exact adjustment of force of current. Qualitative assembly and competent combination of technical characteristics gives the chance to make equal and accurate seams. The owners of the device note the decent quality of work at low voltage (160 — 180 V), good ventilation system, which protects the device from overheating.
advantages:
- a wide range of work performed, thanks to two modes
- smooth and high-quality seams when welding with gas or without
- change of polarity
- welding wire feed mechanism
- good efficiency - 85%
- Excellent value for money
- warranty period 5 years
shortcomings:
- the basic complete set does not include the handle
- relatively large weight
BLUEWELD Starmig 210 Dual Synergic
The compact and ergonomic welding machine is intended for connection of products from stainless steel, aluminum or steel in MIG mode / MAG in shielding gas or flux-cored wire, as well as for MIG welding. Depending on the thickness of the metal, you can choose the optimal operating mode. Semi-automatic welding machine will perform a wide range of different body or installation work, suitable for work at service stations, in car service, good for garage or construction work on a country site. The current welding parameters are displayed on a large LCD screen, which is very convenient when setting up the device. Flux-cored or solid-wire welding is available to the user. The unit is equipped 17 synergetic programs, regulation of electronic inductance and wire annealing. Among analogues in the class the semiautomatic device distinguishes assembly of high quality and reliability. Not wonderful, that this model has become widespread in car repair, where in addition to the technical characteristics it is important to produce levels, neat welds.
advantages:
- manual shutdown of synergetics
- adjustable voltage
- burner mode selection
- synchronization with optional remote control equipment is available
- good power indicator
- best functionality
- precise CPU control
shortcomings:
- high-quality welding of aluminum will require skill
- high cost
Fubag INMIG 200 PLUS
A good semi-automatic welding machine for manual welding works in MMA modes, ME / MAG (with or without gas) and TIG. Universal semi-automatic welding machine from Fubag shows excellent results when working with thick and thin metal, which is an important advantage. This model implements the functions of "anti-sticking", Hot start, «synergy», which stabilizes the voltage value under the specified current parameters, and afterburner arc. Among other advantages of the device: easy and clear change of polarity, automatic supply of welding wire, inductance regulation, voltage and current. In addition to technical data, the unit has collected many positive reviews about the quality of the assembly, users note, that the device copes well even with aluminum, but it will require certain skills. According to experts, it is the best model of the welding semiautomatic device on a ratio the price - quality.
advantages:
- universal in work
- has all the necessary functionality
- good power in 200 A
- simple, intuitive control
- digital panel
- long sleeve
shortcomings:
- sensitive to excessively low voltage
- which are not regulated by pregas and postgas
RESANTA Saip-220
The most powerful semi-automatic machine in the rating is designed for welding in a protective gas environment. From the feedback of the owners it is worth noting the impeccable quality of work on the mixture and decent work on carbon dioxide. The current is set in the range 30 A - 220 A, that is necessary for the production of quality seams. The welding wire supply setting is provided. Voltage deviation range -30% + 10%. The powerful unit will easily cope with welding of thick metal 7 mm - 10 mm, suitable for home or cottage, regular operation in the garage or periodic use in production.
advantages:
- high power
- smooth adjustment of welding current
- welding of aluminum products is possible
- good workmanship and maintainability
- cheap components
shortcomings:
- capricious to mains voltage
- the wire feed speed is not always optimal
Wester Combi 180P
The universal model of the welding inverter-semiautomatic device will be suitable for a home workshop, work in the garage or cottage. The device demonstrates good reliability in operation in the modes of manual arc and semi-automatic welding. With the correct adjustment of current and wire supply, the equipment will cope with welding metal of any thickness. The manufacturer implements the basic functions, necessary for comfortable work with artificial electrodes. Technical characteristics are more than worthy: wide range of current regulation, input voltage 180 V - 250 V, maximum current for continuous operation - 120 A.
advantages:
- good forced cooling
- wide range of available works
- wire feed setting
- the presence of manual arc welding (MMA)
- protection against overload and overheating
shortcomings:
- no objective deficiencies were identified
conclusion
A selection of the TOP-8 best semi-automatic machines included models of different price categories. The main criteria for making the right choice, according to experts, this is the value of the maximum current according to the DC switching factor, additional operating modes, the possibility and convenience of changing the polarity. Choosing a semiautomatic device, all characteristics should be taken into account, on which the quality of the device depends. The review of the best welding machines fully highlights the main features of the top models of this category of goods.