Low-speed drill belongs to the category of professional construction tools. Due to the small number of revolutions and huge power, this device is used for mixing concrete and drilling large diameter holes in solid materials..
Appointment
The low-speed drill is designed to work in cases, when high torque in the tool is strictly contraindicated. Such cases include:
- threading;
- mixing mixtures;
- drilling large holes;
- flaring of pipes.
Pipe flaring is the process of pipe deformation, during which there is a tight connection between the pipe and the pipe lattice.
When the volume of work is large enough, due to low torque and high power, this drill does not overheat. Performing such work with ordinary tools can lead not only to overheating, but also engine burnout. Because low-speed drills are quite heavy, they, usually, equipped with two handles.
Main characteristics
Low-speed drill has the following main characteristics:
- tool power - from 900 Tue to 1600 tue;
- number of revolutions per minute - 400-650 rpm;
- weight - 3-4,5 kg;
- number of operating modes - 1-3;
- drilling diameter - up to 28 mm
Low-speed drill can withstand heavy loads for a long time. Due to these qualities, it is used for large-scale work.
Knead the glue with a low-speed drill
All drills should be divided according to the type of intended load.
- Light devices - for small interior decoration. Average power 700-1000 W.
- Heavy machines - for large construction works. Average power 1000-1500 W.
Choosing a new tool, you should pay attention to the process of selecting the necessary characteristics. The higher the power, the higher the weight of the device and, in accordance, which lead to overheating of the gasoline or diesel engine.
Drill mixer
Special mention should be made of a professional drill-mixer tool, which combines the functions of a low-speed drill and a mixer for mixing viscous solutions. Usually, such models belong to the high price category.
Due to the presence of various nozzles, high power and mode switch, such a tool is able to perform as percussive work on drilling concrete walls and other strong structures, and mix different mixtures.
Choosing a powerful low-speed drill, you should also pay attention to its weight and the maximum diameter of drilling holes.
An important criterion for selection is the presence of modern electronics on drill mixers. In addition to the obvious convenience and security, the ability to change modes of operation will allow you to extend the life of your equipment. Some models are equipped with a force sensor on the start button. The stronger the pressure on the button, the greater the number of revolutions the device begins to emit. This is also true for the opposite situation.
The main advantages of tools, equipped with an electronic system can be attributed:
- convenience;
- security;
- extended service life;
- overload protection.
How to choose a nozzle
If for any reason the device is not included, important to know, how to choose it correctly. Most models have a special standard spindle thread, which allows you to securely fix the nozzle. This standard has been adopted by many major manufacturers and, now, it will not be difficult to choose the appropriate nozzle.
Many models are equipped with a movable coupling with a self-tightening mechanism. The key for such tools is not required, and the diameter of the drill or stirrer can be selected independently, using information, specified in the operating instructions.
Movable coupling with self-tightening mechanism
The maximum size of the nozzle is set by the manufacturer. This figure depends on the technical characteristics of the device.
Overview of manufacturers
Today, the market offers a wide variety of low-speed professional drills. Consider the most popular manufacturers and some tool models.
ZUBR
Russian company, specializing in the production of construction tools. Thanks to the reliable design, wide model range and relatively low price, devices of this manufacturer are in great demand in the Russian market.
ZUBR ZDM-1200 drill mixer
The most popular model: ZUBR ZDM-1200.
- tool power - 1200 tue;
- torque - to 850;
- weight - 4,5 kg;
- maximum diameter of the nozzle - 16 mm;
- class - professional.
Makita
Japanese company, which was able to conquer the market of construction tools with high quality and long service life. Due to high technical characteristics, tools of this brand are great for professionals, which involve the use of equipment for a long time.
The most popular model: Makita 6014 BR.
- tool power - 850 tue;
- torque - 550;
- weight - 2,5 kg;
- maximum diameter of the nozzle - 16 mm;
- class - household.
STURM
Chinese-made equipment. There are tools in the model range, as low, and high price category. Usually, tools of this brand have smaller dimensions and weight, with relatively identical technical characteristics. Devices of this brand can be a great helper, as for professionals, and for amateurs.
Sturm ID20131 drill mixer
The most popular model: STURM ID20131.
- tool power - 1100 tue;
- torque - to 800;
- weight - 3,5 kg;
- maximum diameter of the nozzle - 16 mm;
- class - professional.
Interskol
This company has its own production plant in Russia. This reduces the cost of transporting equipment and thus reduce prices. The tools have a good basic set: great variety of nozzles, additional handles, etc..
Interskol D-16 / 1050R drill
The most popular model: Interskol D-16.
- tool power - 1050 tue;
- torque - to 550;
- weight - 3,8 kg;
- maximum diameter of the nozzle - 16 mm;
- class - professional.