The order of storage of drills allows not only to always keep them in working order and clean, but also at any time to find a tool of the required diameter. To do this, you can make your own organizer for drills, using the simplest materials, which are always available in any home workshop.
Storage of drills in a drawer under a table cover
How to properly organize the storage of drills
To store drills, you can come up with an organizer of your own design or use options, which have already been tested by other home builders. The main thing, that such device provided convenient storage of drills and allowed to find quickly the necessary tool at any time.
Organizers for storing drills can be made from any handy materials. These can be trimmings of wooden bars, details from old furniture and much more.
This drill organizer is made of scraps of aluminum profile
The drill stand must be made with holes. The distance between the holes, as well as their diameter, are selected depending on the cross section of the tool. Depth of holes, usually, performed within 25 mm. That drills in the self-made organizer were convenient to find, a sticker can be made below each storage opening, on which the diameter of the tool will be written.
The shape and dimensions of a homemade organizer for storing drills can be any- it all depends on the preferences of a particular master.
A simple stand for drills made of boards
Production of the organizer for drills
You can make an organizer for drills with your own hands from a case, in which the videotape was previously stored. These cases, differing in the compact sizes, which allow you to still conveniently store a lot of tools. in addition, such a plastic case closes, protecting the contents from moisture and dust.
To implement this idea, you can use another suitable case
First of all it is necessary to make two supports, which will not only compactly place the tool in the storage box, but also will not allow drills to rub against each other and will be blunted. Each drill stand is made of wooden bars, in which holes are drilled.
Surfaces of bars, on which holes will be made, cut at an angle. So, the tools in the organizer will be arranged on a cascading basis, which is very convenient.
Screws are used as owners of bars
The box itself for drilled, which, as mentioned above, will be made of plastic case for videotape, does not require major processing. In the future, the organizer only needs to place special handles, on which each support under drills will be fixed. These holders can be made of small diameter bolts, which will be inserted into the holes, drilled in the side of the plastic case. Stands, put on the holder, can rotate freely, which allows you to change their position when closing and opening the box.
That drills were more reliably kept in the organizer, magnetic strips can be glued to the bottom of each bar or a magnetic knife holder can be used for this purpose. Under the film, which is on top of video cassette cases, you can place a sheet with a list of tools, which are stored in such a case.
So, make your own organizer, which ensures accurate storage of the tool, quite simple. Such compact plastic cases can be easily placed in desk drawers or placed on shelves., where they also do not take up much space. The self-made organizer will remove the question about it once and for all, how to keep drills in order and in good condition.