Categories: Metalworking

Channel - size chart, assortment according to GOST

Such a common element of many supporting structures, as a channel, is a profile of U-shaped section, which can be made of different grades of steel, including stainless. Channels can differ not only in size (a special table is used to determine each of them), but also by manufacturing technology.

We understand the range of channels

Channels are made on cold-rolled and hot-rolled technology. U-shaped metal profiles of different brands have differences in the design of the shelves. So, there are channels, the inner boundaries of the shelves which are parallel to each other, as well as products, the shelves of which are made of some inclination from the inside. However, in any case, the shelves were made, the whole range of profiles with U-section is characterized by high rigidity, combined with light weight. Such properties allow to use successfully channels of any sizes for production of highly loaded designs of building and any other function..

The main advantages of U-shaped profiles include:

  • high strength, which provides resistance to bending loads;
  • the ability to successfully resist not only bending, but also loads of multidirectional nature (gap, compression, etc.);
  • high resistance to shock loads, which can lead to mechanical damage to the structure (metal channel, which is made qualitatively and in accordance with GOST, has virtually no weaknesses in its design, capable of causing its destruction by various loads).

Channel parameters with a slope of internal faces of shelves

Marking

If you look at the range of channels, then you can see, that it includes Metal profiles with a wide range of sizes. In such a variety of options, it is very difficult to choose the right brand of channel, which will be optimal for solving a particular problem. Naturally, manufacturers have taken this into account. They use markings to mark their products, on which it is possible to make rather full idea of ​​characteristics and the sizes of the U-shaped profile.

Channel parameters with parallel faces of shelves

Marking, corresponding to GOST 8240-97, includes both digital, and letter designations. Number, which is the first in the designation, is the main characteristic, it corresponds to the size of the channel, that is, the distance between his regiments. The letter in the label can be identified, to which type the channel belongs. These can be products, in which the inner boundaries of the shelves are made with a slope or parallel to each other ( "B" and "P", respectively), Economic metal profiles ( "E") or light ( "L") type, special purpose ( "WITH" ).

If you need to know all the other sizes of the channel of a certain brand from the range, then there is a special table for this, in which they are listed. The choice of a product of a particular brand is made depending on, what loads the structure will be subjected to, for the manufacture of which it is planned to use.

With sloping shelves

Size chart for channels with sloping inner edges of shelves
(Click, to increase)

Explanation of additional parameters, listed in the table:

  • I - moment of inertia;
  • W is the moment of resistance;
  • i is the radius of inertia.

With parallel faces of shelves

Size chart for channels with parallel edges of shelves
(Click, to increase)

Economic with parallel shelves

Size chart for economical channels with parallel shelves
(Click, to increase)

Light series with parallel faces of shelves

Size chart for light series channels with parallel edges of shelves
(Click, to increase)

Special

Size chart for special channels
(Click, to increase)

Limit deviations of parameters

Maximum deviations of channel parameters

Table of maximum deviation of channel parameters
(Click, to increase)

Theoretical weight

Table of theoretical weight of the channel
(Click, to increase)

Some features of the choice

Assortment of channels, Of course, significantly inferior in variety of assortment corners, but this does not prevent the selection of the product of the required size and characteristics to solve a particular design problem. This rule should be followed when choosing a particular brand from the range, which is relevant for products of any profile: deciding on the type of channel, according to your requirements, that mark should be included in the specification before the drawing, which is closer to the beginning of the table.

Assortment, in which different types of channels are presented in the form of a table, allows you to determine not only their size, but also a number of other important parameters:

  • weight of running meter;
  • cross-sectional area;
  • axial moment of inertia;
  • axial moment of resistance;
  • radii of inertia.

The last three parameters are calculated relative to the central axis of the channel section.

It is very important to choose those brands of channels, mechanical characteristics of which are not lower than the estimated more, than on 5%. If this condition is not met for the selected brand of product, it is better to take the channel one number higher.

admin

Рекомендоване

Criteria for choosing a household sewing machine

A sewing machine is an indispensable tool for many housewives.. Ее наличие среди бытовых принадлежностей дает возможность

2 years ago

Buying a fuel truck is a profitable investment in business productivity

Fuel truck - special equipment, which is intended for the transportation of refined products and fuels and lubricants. Она представляет

3 years ago

What you need to know about the guitar. We reveal secrets

If you are determined to learn the acoustic guitar, варто одразу купувати якісну продукцію в надійному

3 years ago

Alginate mask – salon care at home

Face masks are one of the most popular face care products.. After all, они становятся

3 years ago

Gifts that women will love

"The key to a woman's heart is an unexpected gift at the wrong time", - says Forrester in the film "in…

3 years ago

What hair clip is best for your hair, so that she can complement the created image

Modern hairpins can not only fulfill their immediate obligations, но и сделать образ девушки индивидуальным

3 years ago