Teleantenna, made with their own hands: the most popular options for making antennas from improvised means

Nowadays, everyone watches TV. Well, or almost everything. Most people like to watch satellite TV. You can buy a TV antenna in the store. But sometimes it happens, that the antenna becomes unusable, to the store to go far, and I want to watch my favorite show. At such moments it is possible to resort to improvised means. Example, if the user is in the country and does not have the opportunity to go to the store. In this case, you can just make a TV antenna for giving with your own hands. Even satellite.

Indoor antenna with your own hands

It is possible and easy to make a simple TV antenna from improvised means. You can find many interesting instructions on the Internet, which will help to make various options of TV antennas, made with their own hands. There are many options, how to make TV antennas with your own hands.

The most popular type of antenna, which craftsmen make from the common people, unambiguously considered a homemade TV antenna, made from beer cans. It is done easily, hard-to-reach materials should not be sought, and very little time is spent on the whole manufacturing procedure. The ideal version of a homemade antenna, given that fact, that there will be more channels, and the picture quality will be an order of magnitude higher.

The simplest option can definitely be called a room antenna, for the manufacture of which you will need a wire. Of course, number of channels, which can be seen when connected, will be quite limited, and the picture is unlikely to please much, but these inconveniences are offset by other circumstances: extremely easy to manufacture, minimum time and use of the minimum amount of materials. However, the number of channels and the quality of the pictures can be corrected, fastened the other end of the wire to the clothesline, which will help catch more channels.

There are other options for making your own hands, but they cannot be called popular. Some require more complex manufacturing procedures. In other cases, you may come across extremely negative feedback from people, who tried to make them. So it is better not to spend time on the description of their production. You will not find anything useful in this. Some instructions for designing satellite dishes at home are simply not true.

How to make a TV antenna from beer cans

One of the most popular options is an antenna made of empty beer cans. It's easy to do, and the materials are not difficult to find. Masters, who have experience in creating such antennas, claim, that the device can be assembled in almost ten minutes, while receiving channels very, very productively.

How to make an antenna with your own hands? How to make an antenna from cans?

To make a TV antenna with your own hands, the following materials will be required:

• cable
• a few cans of beer (well or other low-alcohol beverages)
• plug
• self-tapping screws
• screwdriver
• stick
• insulating tape
• self-tapping screws in quantity 2 things

Instructions are attached below, how to make an antenna with your own hands.

How to make a TV antenna: tv antenna with your own hands

1. First you need to tape two beer cans to the stick, trying to keep a close distance from each other 7 centimeters. In that case, if the jars have rings left to open, then the cable can be attached to them, using self-tapping screws.
2. Next, you need to screw the screws into the jars, strip both ends of the cable and attach to the screws.
3. For stability of a design it is necessary to fasten a cable with an insulating tape to a stick.
4. That it worked and in moments of bad weather, close the jars with a large plastic bottle, in which the bottom and neck should be cut off. Then drill a hole in the bottle, through which the cable will be routed. Once this place is scalded with boiling water, the plastic will change shape and seal the hole. This simple device will act as a specific amplifier. Quite a simple and good amplifier.

Here's how to make a simple TV antenna from beer cans for your TV. It is made quickly and requires a minimum of materials.

Antenna for TV with your own hands

There are other options for designing a homemade antenna for a TV. The option will be described below, how to make a TV antenna:

1. To begin with it is necessary to find any contour from metal, pre-insulated. You need to connect it to the antenna input on the TV.
2. The next step is to install the outline on a wooden stand. You need to put the resulting design on the TV. Well, or on the balcony, to whom as convenient.
3. Use a plug and cable to connect the TV to a home-made antenna. Before that, the cable insulation must be cut, about 5 centimeters in length.
4. The cable winding will open, which will need to be divided in half and bent.
5. The inner winding should be cut to the same length, to expose the core of the cable.
6. In the plug it is necessary to fix the exposed core of a cable with a winding, using screws. By the way, if there is not enough space in the plug, then the winding can be shortened.
7. The other end of the cable also needs to be cleaned, then fasten to the contour, making a ring out of a vein.
8. The joints should be wrapped with insulating tape to make the structure more stable.

And the homemade antenna is ready. In principle, the design itself is quite simple, although it requires effort. Well, the availability of appropriate materials.

How to make an antenna with a minimum of materials

There are two options for making a homemade antenna, using the minimum amount of materials. This antenna is easily made at home and is one of the simplest homemade antennas.

1. You will need ordinary wire to make it. It is recommended to take a wire of copper and brass. Aluminum wire is definitely not suitable because this metal is oxidizable, and very quickly. The wire should be stripped of insulation material at both ends. One end must be attached to a pipe or battery, while the opposite end of the wire should be inserted into the TV connector. Because of that, that the pipe runs literally through the whole house and goes upstairs, it is an amplifier of the required frequencies. Literally at once it will be possible to observe a signal, which will appear after performing the simple operation described above. This design will show five channels.
2. The second option is available to happy apartment owners with a balcony. To create such a structure, you must also take the wire, only in this case the sample will be needed longer, as you will need to connect the TV and the balcony area. The wire should first be stripped on both sides. After this procedure, connect one end to the TV by plugging it into the cable jack. The other end should be stretched to the balcony and fastened to ropes or strings, on which linen is usually hung. This method will provide a much better picture, and there will definitely be more channels.