Tuning headlights and taillights VAZ 2110 and 2112 with their own hands

Owners of VAZ cars often make various changes to their design to improve performance and appearance. Along with improving the engine, chassis and body among motorists quite common tuning headlights VAZ.

To perform improvements to the headlights and taillights on the models 2110-2112, you can contact any car service - experts will help to solve this problem.

However, if you want, you can do this work with your own hands - you just need to carefully study the instructions, in which it is explained, how it is done.

Tuning of headlights on the VAZ car

Replacement of H1 lamp in Bosch headlights 2110 on H7

Many VAZ owners 2110 face it, that Bosch lanterns in their cars do not illuminate the road well enough in the dark. They have a standard H1 lamp.

Experts say, what if you replace "Bosch" with H7, the situation will improve significantly.

Complete replacement of old optics

The process of replacing the standard lamp H1 with H7 in VAZ light sources 2110 is quite simple - it consists of the following stages:

1. Disconnect all headlight switching.
2. Remove the radiator grille - you need to unscrew the bolts, which fastens.
3. Perform disconnected pads with wires from repeaters.
4. We remove a hydrocorrector - for this purpose it is necessary to press a clamp and to turn on ninety degrees.
5. Unscrew 3 bolts, which fastens the lantern, and move it back. Move the eyelash to the center, getting rid of the wing engagement.
6. Let go 2 the buffer fastening bolt and we remove an eyelash.
7. Unscrew another nut and remove the light source.
8. Heat the sealant and open the headlight with a knife.
9. The hole for the H1 lamp will need to be drilled. It is smaller in diameter, than required for H
10. You will still need to remove the terminals and install them, which are suitable for lamps, which we have established - there will be 4.
11. After reaming, insert the lamp into the hole and fix with standard fasteners.
12. The fixation of the reflector will need to be corrected, to keep it normal.
13. Instead of lamps we can install LEDs in dimensional lamps.
14. Next, collect the lights back, install them on the machine and adjust.

Having installed other lamps, you will be able to see, that the lighting will be better - problems with visibility during the night ride will no longer be.

Bi-xenon lenses

Installation of bi-xenon lenses in VAZ lanterns 2110 with their own hands

Installation of bi-xenon lenses in the lantern will also help to eliminate the problem of insufficient road lighting. This gives us the opportunity to qualitatively illuminate both the near and far zone, not blind at the same time drivers of oncoming cars. The light is more saturated. It also affects the quality of the review.

Installing lenses with your own hands is a very time-consuming and responsible process. You interfere with the design of lanterns. If mistakes are made, this can lead to an accident on the road. All work must be done very carefully, honestly and responsibly.

The algorithm for installing the lens is as follows:

1. Disassemble the headlight. To do this, it must be heated, to make the sealant soft, and open with a knife.
2. Remove the reflector.
3. Special adapters will need to be made of aluminum or steel sheet, by means of which the lens will be fixed.
4. After installing the lens with edging, adjust the inside of the headlight. To do this, you can make slots on the side walls, and cover the voids with pieces of plastic. Leave space between the lens and the substrate - it will be needed, to adjust the lighting.
5. Assemble the headlight, clamps for the team, so that it is hermetically sealed. Otherwise, it will be fogged in operation, which will affect the quality of lighting.
6. After installation, adjust the lights, then you can appreciate all the advantages of tuning.

Installation and connection of running lights on Renault Logan
Another option for bi-xenon headlights

Tinting of taillights on VAZ cars 2110-2112 with their own hands

Tinted taillights help make the rear view more stylish and elegant. You can do this work with your own hands, if you want to avoid unnecessary financial costs, which will result in contacting a car service. You have the option of tinting your car's taillights with 2 funds:

• tinting varnish;
• tinting film.

Varnish is sold in special cans. It must be indicated, that it is designed for car headlights.

The taillights can be removed for work or do all the work without it. The process is as follows:

• the taillights must be thoroughly washed and dried;
• degrease with alcohol;
• apply varnish from a distance of about 30 cm. Between layers it is necessary to make breaks for drying. The more layers, the stronger the toning effect;
• after drying the last layer, you can perform a special polishing to obtain a matte effect.

Tinted headlights with film

You have to remember, that the tint varnish is washed away over time. If you want to remove it from the taillights of your car, use acetone. It will help to get rid of tinting varnish without effort.

The film is a more convenient means of toning, as it can be removed at any time.

On sale you can find a wide selection of different tinting films. Try not to save and buy the highest quality. Різниця в ціні не надто сильно вдарить по вашій кишені. The gluing of the film is as follows:

• wash and dry the taillights of the car;
• degrease them;
• try on the film and perform cutting;
• spray the surface of the headlights with soap solution;
• remove the substrate from the film and apply it to the surface to be pasted;
• press with a special rubber spatula, smooth and expel all water and air from the inside out;
• after drying, the work can be considered complete.

How to change a low beam lamp to a Renault Duster

Toning headlights, you have to remember that, that there may be problems with traffic police. So do not overdo it with tinting and follow the measure - then there should be no problems with the police.

Tuning headlights tinting varnish

Conclusion

Lantern tuning is a fairly common phenomenon on VAZ cars. It has to do with that, that not always their design allows to achieve high-quality full-fledged illumination of the road at night driving. At the same time, it is a serious element of the exterior of any car. Which driver does not want, to make his car look spectacular and modern on the road? Today there are many tools and methods for tuning light sources on VAZ cars. In addition to those considered, in this article you, no doubt, will be able to find many others. Imagination and ingenuity help motorists regularly find new ways to make their car better and more beautiful.