Very often owners of VAZ cars try to make various improvements to their design, to improve their performance. These are various changes in the design of the engine, brake system, gearbox, bumper, wheels, etc.. P.
Among all these modifications the tuning of a suspension bracket of VAZ occupies a special place - it is one of determining factors of controllability., ride quality and road safety.
To improve the suspension, you can ask for help from car service specialists or do all the work yourself. This will help you reduce your financial costs and do so, as you see fit. Let's consider some possibilities of improvement in various models of cars of the VAZ brand.
Tuning of a suspension bracket of the car Vaz 2109
Suspension tuning in VAZ models 2101-2107
Lack of front and rear suspension VAZ 2107 and in cars of this group in that, that it is too soft. This creates some inconvenience, especially at full load. The wheels cling to the arches, which significantly complicates the movement.
A good way out is to install on the front suspension springs from the car "Field 2121" - they fit well in size. They will provide the necessary rigidity, and the car at full load will stop sagging. Such springs can be suitable not only for the front, but also for the rear suspension. in addition, rubber bumpers will need to be replaced.
Next, you will need to replace the shock absorbers, which can also improve the driving quality of the car. It is best to choose gas-oil - the immobility of the rod will add more elasticity to the front of the car.
However, it should be borne in mind, that after replacement of springs and shock-absorbers there is a high probability of that, that will increase the roll of your car on corners. To minimize it, install anti-roll bars - they solve such problems well.
Double front stabilizer on the car VAZ 2101 — 2107
Triangular levers are another way to improve the situation with your own hands. They are used for more precise settings. The levers make it possible to install a negative camber. You do not need to replace the lower bolts, which carry out fastening to a beam.
Which means the departure of the wheel
in addition, installing triangular levers, you get the opportunity to increase the castor - the angle of longitudinal tilt of the axis of rotation of the wheel. This helps to significantly improve the handling of your car. However, installing levers, you will need to adjust the camber. in addition, you will need VAZ stabilizer bones 2110.
To give your car more stability, you can provide her with a lower landing. To do this, use the rear crossbar - it will allow you to adjust the axle relative to the body.
Tuning of a suspension bracket of the car Vaz 2101
VAZ suspension tuning 2108-2109
In the "eights" and "nines", essentially, the same methods of improvement, as in the previous section. It is recommended to make the following changes with your own hands:
- install a stabilizer bar from VAZ 2110 - it will help to reduce a roll on turns;
- in front to put gas shock-absorbers Plaza;
- make a negative collapse of the wheels;
- increase the angle of longitudinal tilt of the wheels in front of the car.
This will help improve the ride quality and handling of your car.
Tuning of a suspension bracket of the car Vaz 2109
Tuning of VAZ cars 2110-2112
This group of machines can be improved according to the same scheme, which is described above. Or go the other way - install your own more functional suspension, example, from "Priory".
This suspension is much stiffer, the steering wheel listens better to the driver, there is concentration and clarity. All the advantages are especially noticeable when passing holes and depressions when driving. The front is a couple of inches higher.
Some, truth, on the contrary put a suspension bracket from VAZ 2110 on the "Prior": for different motorists - different preferences. It is impossible to come up with any statement, with which everyone will agree on 100%.
Stickers on the caps of alloy wheels with the car logo
Suspension tuning on the car Vaz 2110
Tuning of VAZ cars 2113-2115
VAZ front-wheel drive cars 2113, 2114 and 2115 it is accepted to provide a sports suspension bracket. It improves stability and controllability while driving:
- to begin with, the front racks are being finalized, turning them from oil-filled to gas-oil. This is done by injecting gas into the working chamber. Due to this, the rod will automatically accept the initial position after immersion;
- to protect yourself from the departure of the spring while driving, perform restrictions on the stroke of the rod;
- regular rods can be replaced by "kailovers" - sports racks. They will allow you to lower the car. This will give it stability. At the same time the shortened springs are used, which helps to minimize the level of roll of the car on turns;
- the triangular levers described above. Will improve the handling of the car, suspension adjustment accuracy and castor magnification.
So we tune the suspension with our own hands in the models of the group 2113-2115, making her athletic. This improves handling, the roll decreases, and increases your road safety while driving.
Conclusion
Many experts say, that tuning of a suspension bracket of cars of the VAZ brand is inevitable, if you want to, that the car listened well. To do this, you have to make a number of changes to the design. They will make the landing lower and more stable, steering wheel - obedient, will give the car elasticity and composure.