Spotter is electrical equipment, which is used for car body repair. If you want to carry out repair work yourself, without seeking help from specialists, then the Hammer TT spotter is just that, What you need.
Spotter selection scheme
Advantages of the Hammer TT spotter
Some people still use the spot welding machine, but more and more professionals and amateurs prefer the Hammer TT spotter. And all because, that it has a number of advantages:
- economy. On average, the cost of labor is reduced by forty percent. Also thanks to the wiring, consists entirely of copper, the tool consumes a minimum amount of current;
- quality. Using a spotter, you will save factory seams and an anticorrosive covering;
- convenience. The amount of reinforcement work is reduced by forty-five percent. In addition, the Hammer TT has a special indicator, which protects the tool from overload. If the yellow LED starts to light up, unplug the tool immediately;
- versatility. Spotter Hammer TT welds rivets, destroys dents, restores stiffening ribs, levels the surface of the machine, squats metal. All this is due to that, that the tool has several operating modes: welding of a triangular electrode, traction rings and corrugated wire, as well as sediment and heating electrodes (copper and graphite);
- simplicity. The manufacturers have equipped the Hummer spotter with a simplified SINERGIC tuning system. exept this, in order to activate the welding discharge, just press a special button on the gun. The equipment also has a rotary regulator, which provides easy selection of the working tool and allows to change power level accurately;
- weight. This is the lightest tool of all existing spotters of this kind. His weight is everything 14 kilograms.
How to choose a compressor for car painting?
Spotter Hammer TT
How to use the Hammer TT spotter
Before using this tool, read the instructions carefully. If you apply the spotter incorrectly, then you risk not only not to repair the car, but also to harm her:
-
- Network connection. This device can only be included in the public network. Remember, what if network protection is triggered when the tool is connected, then you need to check the type of breaker and the value.
- Launch the spotter. To do this, turn the potentiometer. The operating mode and current of the device is selected by means of the potentiometer of adjustment.
- Using. The manual control button allows you to select the operating mode. Picking up the right range, connect the generator mass mode to the damaged surface of the car body. Remember, that you need to connect at a point, as close as possible to that place, where you want to work.
Recommendations for use
Follow our tips for proper and safe use of the Hammer TT:
- two or three times a year the Hammer TT spotter needs to be opened and blown out. This will clean it of dust and extend the life of the device. exept this, check that all electrical connections are secure, using a special insulated tool. We must not forget about the power cord. Remember, what if it is faulty, it must be entrusted to qualified specialists. Only they can carefully replace it;
- carry out repair work only in the mask of the welder with filters according to EN 169 or EN 379. exept this, choose the right clothes: wear things made of cotton or jeans (such fabrics are refractory), protective gloves and work apron;
- the Hummer TT device can be used only in a clean and well-ventilated room on a flat surface. exept this, remove all items, which ignite easily, from the workspace. Of course, the spotter must not be operated in snow or rain. When working, keep the tool at a distance of one meter from the repaired part;
- do not touch on those details, which are live;
- if indoors, where the repair is carried out, there are other people, warn them about the dangers of the welding arc. It is desirable to protect others, protecting the workpieces with refractory screens;
- to have the right to perform repair work, using the Hammer TT spotter, the person must have the appropriate permission. The first use of the device is best done in the presence of knowledgeable people, who will be able to help if necessary.
How to restore wipers by car
Device for contact welding
Using Hammer TT, you can easily do all the body repair work on your car.