There are now many ways to change the light transmittance of car windows. The most available tinting material was and remains a film, which not only protects the interior from the glare of the sun, but also gives the car solidity and unique appearance. One of the most interesting in terms of color design and performance characteristics is rightly considered toning "Infiniti" on the car. What is the peculiarity of this material, as well as some of its characteristics will be discussed below.
Toning film
What is special about Infiniti film
A characteristic feature of this material for darkening glass is the presence of an outer metallized layer, which visually gives the car glass a mirror shine and a number of protective properties:
- ultraviolet radiation is delayed until 98%, protecting passengers and the cabin from fading;
- the strength of glass is much increased - the glued film prevents its cracking and destruction;
- the outer metallized layer reflects the rays of the infrared spectrum, therefore, overheating does not occur inside.
in addition, this tinting has almost no effect on the ability of glass to transmit light inside. The color rendering is also virtually unchanged. This is well noticeable, when Infiniti is glued to athermal glass - the native color does not change at all.
Infiniti film has a multilayer polymer structure, which makes it strong. And the layer - with aluminum coating, which gives the material a characteristic effect. He is outside, that is, adjacent to the car glass. Tinting does not change color over time and is extremely resistant to various damages.
Is tinted windshield athermal film allowed
Metallized tinting material has another interesting feature. Mirror shine is manifested only during the day in sunny weather. In the evening, the film gives a lead-matte shade. Despite the similarity of all metallic tones, they have a wide range of colors, that gives the chance to pick up easily toning material for a car of any design.
mirror shine
Infiniti film protects the interior not only from high temperatures. In winter, it significantly reduces the thermal conductivity of car glass, why the car warms up from the inside much faster. In short, toning has only advantages in terms of aesthetics, and in practical terms.
Varieties of Infiniti film
The main difference, in addition to color, which should be taken into account when choosing a toning - is the ability to transmit visible light, which when marking the material is expressed as a percentage. Let's say, the darkest film (5%) misses the specified number of visible ??rays, delaying or scattering at the same time, in accordance, 95%. And here 70% material delays only 30% light. Therefore, it is usually glued to the windshield.
Correct selection of a film on light transmission capacity is the most important. It provides comfort in the cabin, but does not interfere with the driver's inspection. Usually the darkest material goes to the rear windows and doors. Closer to the leading edge, the percentage of visible light transmitted by the film should increase.
So, if you do the right tinting with Infiniti film, you can reach a compromise between the excellent appearance of the car, comfort in the cabin and a good attitude to you car inspector.
Alya Dubai tinting film